How to overcome the gas does not go on the stove, find out the cause!

You do not need to worry, you can find out how to deal with the gas that does not come easily on the stove below.

The gas stove at home does not light even if the gas has been replaced with a new one?

Don’t worry, it usually happens because the gas can’t get to the stove.

This causes the gas stove at home not to light because there is no gas flow.

To fix this, you must know the different causes of the gas not lighting first.

That way, you know what the right solution is for the problem.

Let’s look at the 5 causes and how to easily deal with the gas that did not reach the stove below:

Causes and ways to overcome the gas does not go down to the stove

There are many things that make a gas stove not light, one of which is the gas that does not go down to the stove.

To solve this problem, you need to know the reason why the gas does not want to go into the stove.

Here are five reasons why the gas does not turn on the stove and how to solve it easily at home:

Clogged stove line

After installing new gas, sometimes the fire cannot start on the gas stove.

If this happens, it could be because the gas flow from the LPG cylinder to the stove usually has a blockage.

Why does the gas not go up in the stove? Apparently fThe main cause for clogged stove ducts is usually because the stove pipe and regulator are damaged.

Therefore, you can try to reset the installation of the stove pipe regulator.

Then, make sure to close it tightly so that there are no leaks.

Always use rubber so that the gas regulator at the end can be tighter and tighter.

There is a Crust

A dirty gas stove, especially in the furnace section, can be the main cause of the fire that cannot rise to the stove.

Because, it is blocked by the stubborn crust in the furnace and will cause the fire not to burn.

Therefore, you can do how to deal with the fire that is not raised on the stove by cleaning the stove from the ground and the scale.

In this way, the fire can rise and be well lit.

Regulators in trouble

The regulator is an important component that must exist to connect between the pipe, the stove and the LPG gas cylinder.

If there is a problem with the regulator, it will certainly prevent the flow of gas to the stove so that the fire does not start.

In fact, this problem can cause the stove not to light after changing the gas cylinder.

This often happens because the buckshot balls are inside blocking the opening of the gas fan.

To solve this problem, you can touch the top of the regulator several times so that the position of the buckshot can be adjusted again.

Leaking tube

The way to deal with the gas that does not want to go to the other stove is to check the section of the hose.

The hose is the part that distributes the gas from the LPG cylinder to the stove.

If there is a leak in the pipe, then automatically the gas in the pipe cannot flow to the stove.

To make sure that the gas cylinder is leaking in the hose, you can kiss that part.

The hose has a pungent gas smell or not.

If there is a characteristic pungent smell of gas in the kitchen, it may really be a leak in the hose.

Perhaps this is the reason why the gas stove does not turn on after changing the tube.

Well, to solve this problem, you can immediately replace the hose with a new one.

***

Here are some of the causes of gas stoves that do not light. Starting from the gas stove does not want to turn on after changing the tube and other problems that you need to know.

By reading this article, you will know why the stove does not turn on after changing the gas and how to solve it easily.

Do not forget to visit Google News Rumah123 to get other interesting articles about the property.

Get convenience to meet the needs of the property, because www.lacrymosemedia.com will always be #AdaBuatAnda.