How to mix paint with the correct thinner and steps

How to mix paint with the correct thinner and steps

how to mix paint and thinner

Find out how to mix paint with the correct thinner and steps for good results here!

There are many types of paint that you can use for different home needs.

A type of paint that is often used is oil paint, which is known to have a very strong texture.

Often used for household needs, of course you must have the best ingredients for a painting.

So, use it thinner so it is the right choice to give good and appropriate results.

The process of painting and thinner even easy to do if you already know the dose.

If you have problems, how to mix the paint thinner with steps? Check out the discussion together!

How to mix paint with Diluent and the steps

Check the following steps to combine paint and thinner includes:

1. Use Diluent right

Oil thinner


To mix oil paints, thinner so the good choice to dilute the main structure.

In addition thinnerThere are many other types of fluids ranging from afduner to gasoline.

In the market, there are many types of thinners that vary from thinner nitrocellulose, impala, polyurethane up to thinner impala.

To make it easier to find types thinnerThere are several products that you need to know, among others:

  1. Thinner ND.
  2. Thinner HG.
  3. thinner A.
  4. Thinner Super.
  5. Thinner Super ND.
  6. Super HG Thinner.
See also  8 Ways to Set Sharp AC Remote for Maximum Cool

Type thinner Commonly used as wood and metal paint thinners are type A or thinner great

For the layer process pernicious, thinner used is ND thinner or also known as PU thinner.

2. Know the type of Paint brand

Propane wall paint

The next step if you already have a type thinnerthen you have to choose a good type of paint.

Each type of paint has different characteristics, especially in terms of thickness.

Before using the paint, make sure you know the packaging can to see the instructions for use listed.

3. Adjust Paint and Thinner

How to mix paint with thinner


When you make a paint mixture, there are three stages, namely the initial stage, the second stage and the varnish stage to produce a strong texture.

In the initial stage or first layer, make a mixture thinner and a slightly viscous varnish.

This is so that the paint can close quickly and tightly, while saving the use thinner.

Then, you can make a mixture slightly thinner than the first step.

You can adjust the amount and ratio of the paint with a ratio of one to three.

A common example you can do is, if you use 1.5 liters of paint then mix 4.5 liters and mix until the distribution is uniform.

Although each brand of paint has a different viscosity, you can adjust the dosage.

If the paint mixture is still too thick, it’s a good idea to add more thinner until the dose is right.

4. Dosage for Paint Varnish

Paint varnish process


After going through the stages of painting, the first and the second layer, then proceed with the varnish stage.

See also  7 ways to remove paint marks on the floor without leaving scratches

You can use the varnish cover in a ratio of 1 and, for example, if you use 2 liters of clear varnish, then mix 1 liter. thinner.

This varnish is the last stage of painting a layer that was previously protected by protective paint.

The presence of varnish is expected to make the paint have good durability for long use.

This varnish paint is clear in structure, but can be adjusted so that it becomes colorful according to the needs of the wood and the wall.


These are some ways to mix the paint with thinner well and correctly and the steps.

Find interesting information about the property, more about

Create a dream home with an environmental vision together Podomoro Golf View more to and give www.lacrymosemedia.comthat certainly #AdaBuatKamu!