How to clean the 1 tube washing machine correctly

How to clean the 1 tube washing machine correctly

2 minute

How to clean a washing machine 1 tube is not as difficult as it seems. Want to know how? Check out the steps in this article, go!

The washing machine is a type of household electronic equipment that must be cleaned regularly because it is often used.

If the washing machine is rarely cleaned, dirt will accumulate and this will have a bad impact.

A dirty washing machine experiences a decrease in the performance of the washing process, so the clothes that are washed are not too clean.

You don’t want that kind of thing to happen, do you?

Learn how to properly clean a single tub washer, here!

How to clean a 1 tube washing machine

clean the washing machine 1 tube

1. Preparation of Tools and Materials

Before entering the stages of how to clean a tube washing machine 1, first there are several cleaning tools and materials that must be prepared.

The following tools and materials must be prepared:

  • Microfiber cloth
  • Used toothbrush
  • White vinegar or bleach
  • Baking soda

These tools and materials are very easy to find, although at least they should be at home.

2. Fill the Tube with hot water

After preparing the necessary tools and materials, now is the time to learn how to clean a single-tube washing machine.

See also  Easy steps How to install a bathroom shower

Start by scrubbing the tube, then do it with hot water.

This method applies to all types of single-tube washing machines, both with front opening and top opening.

After filling with hot water, turn on the washing machine as usual.

Wait until the process is complete, then remove the water in it.

3. Give vinegar solution

If you have finished how to clean a washing machine 1 tub with hot water, continue with the vinegar solution.

Mix one liter of vinegar with as much water as the washing machine drum can hold.

Vinegar is highly recommended as an ingredient for cleaning washing machines because it is proven to be effective in removing soap residues and soil in the drum.

In addition, vinegar is also very safe to use and does not damage the inside of the tube.

After filling with the vinegar solution, let it sit for an hour, then start the washing process as usual.

When the process is complete, discard the vinegar solution in the tub of the washing machine and wait for it to dry.

4. Clean Corners and Cuts

The mistake that often occurs when cleaning a washing machine with a tube is to clean only the tub.

In fact, every corner and between the pipes must also be cleaned so that the dirt that flows out is completely gone.

Use an old toothbrush to clean the nooks and crannies of the tube.

5. Clean with a microfiber cloth

When the inside of the tube is dry, continue to wipe it with a microfiber cloth.

See also  7 ways to clean a washing machine with baking soda. Auto Shine!

In addition to cleaning the inside, don’t forget to wipe the outside of the washing machine to make it look clean.

How to prevent the washing machine from getting dirty easily

It is undeniable, washing machines are also often dirty from dust or dirt stuck in the clothes.

However, it should be noted that the level of dirtiness of this washing machine is actually also affected by the way it is used.

How to prevent a washing machine from getting dirty easily is actually very simple, which is to be wiser in choosing a detergent.

To keep your washing machine from getting too dirty, start with a detergent that dissolves easily, because it doesn’t leave a lot of soapy residue.


Hope useful, Property People.

Find out more interesting information at Berita Indonesia.

Visit and to find your dream home from now on.

Get convenience to meet the needs of the property, because we always #AdaBuatKamu.

Visit now and find your favorite residence, one of them Griya Reja Residence!