7 Ways to repair walls that have been dry for a long time so they don’t crack

7 Ways to repair walls that have been dry for a long time so they don’t crack

3 minute

When building a house, one of the things that must be considered and must not be missed is the cleaning of the walls so that the house looks clean. However, how to paint a wall that has been dry for a long time to make it look perfect?

Property People, the process of building a house certainly takes a lot of time.

Building a house from scratch must go through a number of stages that you must pay attention to.

Nahone of the stages of the construction of the house is the paving of the walls.

According to the KBBI, to wash is to smooth the plaster of the walls with cement mixed with water.

Melansir aquaproof.co.idRepairing the wall is an important step so that the residence looks clean and perfect.

The cleaning of the walls aims to close the pores in the plaster so that it looks smooth and ready to do the painting process.

However, sometimes, some people miss the repair process, especially when the walls have been dry for a long time.

Many say that a wall that has been dry for a long time will be quite difficult when it is repaired.

See also  How to plant shallots without seeds, easy and practical

However, this is not really true because you can learn to repair a wall that has been dry for a long time so that it is not easy to crack and is durable.

How? Read more below, how to launch the YouTube account Tukang Rumah Channel and other sources.

7 Ways to Fill Dry Walls for a Long Time

1. Preparation of Acian Ingredients

how to paint a wall that has been dry for a long time

The first thing you have to prepare before repairing the wall that has been dry for a long time is to prepare the acian paste.

The mixture uses a thick skimmed coat (for the first layer) and a thin/final coat (for the second layer).

Then, put the first paste with a thick suede coat on 40 percent water in a container.

After that, stir the mixture until it looks like a paste.

The thickness of the dough can be adjusted as needed.

However, if it feels too runny, add more skim coat to match.

2. Clean walls

how to paint a wall that has been dry for a long time

The second step is to make sure the drywall is clean.

Use a broom to clean the surface of the wall.

Cleaning is important so that during the washing process there is no importance that is always attached.

3. Flush the wall with water

Before starting the painting, it is recommended to sprinkle water on the wall to be treated.

This sounds trivial, but it is quite important, that’s it.

If you immediately wash a dry wall, it is likely that the plastered concrete will not stick perfectly.

Then, wet the surface of the dry wall with water until the uniform distribution, yes.

See also  8 Ways to remove guests kindly, don't hesitate!

However, this method is optional because the special cement acian actually does not need water first.

4. Apply the First Asian Cement

how to paint a wall that has been dry for a long time

The way to repair a wall that has been dry for a long time is to start the process of filling the first part with an iron roskam.

This first filling does not need to be thick, as long as it is done evenly, because it will be smoothed by the second filling.

Make the filling for about 30 minutes so that it does not break easily and that the dough is tight.

5. Make the Second Precise

how to paint a wall that has been dry for a long time

If the first patch has been completed, the next way to clean the dry wall is the second patch.

Make the first dough as before, yes.

This second layer is the final layer that is applied thinly, it does not need to be too thick.

Apply the plaster evenly either vertically or horizontally on the surface of the wall.

6. Smooth with Cement Paper

Property People, if the plastered wall is dry, check that the surface is also.

If there is a messy finish, especially at the wall joints, you can gently rub it with cement paper.

This smoothing process is carried out so that the surface of the wall that has been treated becomes smoother, smoother and cleaner.

7. The Wall is Ready for the painting process

How to paint a wall that has been dry for a long time has been completed.

Now, it’s time to do the painting process so that the walls look cleaner and more perfect.

See also  Causes and How to Overcome the Yellow Light on the Electricity Meter

In the painting process, make sure that the condition of the wall is dry and completely flat.

We recommend that the painting process be done the next day, Property People.

Applying this method, the paint easily absorbs perfectly and does not peel off.

***

How? Interested in trying it yourself at home?

Hope useful, Property People.

Check out more tips and tricks on houses at Berita www.lacrymosemedia.com Indonesia.

You can also check your dream home via www.www.lacrymosemedia.com/id and www.lacrymosemedia.com.

Find a variety of interesting promotions like Botania Lake Residence because we always #AdaBuatYou.

** Image source: YouTube channel/Tukang Rumah